대량구매문의

Ghost Immobiliser Installation

Install a ghost immobiliser on your vehicle to protect it from car thieves. Our TASSA verified system protects vehicles against hacking, key cloning and immobiliser bypassing.

The system is hidden inside the wiring loom in your vehicle and is inaccessible to anyone who is looking. It works by creating pin code push sequences through existing buttons on steering wheel, door cards and centre console.

No circuit cuts

It's not surprising that car owners are concerned about protecting the car they've spent so much money to purchase. Traditional security devices, like alarms or wheel locks can be easily bypassed by thieves. Ghost immobilisers, on the other hand, is a highly effective solution that works silently and cannot be detected by modern thieves.

A ghost immobiliser, also known as a hidden device, is a device that communicates to your vehicle's data network CAN to shut off the engine. It does this without the use of key fobs or radio frequencies. It communicates with the ECU of your vehicle by using buttons on the steering wheel, dash and door panels. This creates a unique pincode that is only accessible to you. The code can be changed at any time, and can have up to 20 digits depending on your preferences. It also comes with a secure emergency code that you can use should you forget your PIN.

The ghost immobiliser could also be used to prevent relay boxes from transmitting the car key's signal within your home, which will unlock the doors and start the vehicle. It could also block the latest techniques of stealing your vehicle such as OBD port hacking. The device is tiny, weatherproof and difficult to detect. It's also very difficult to hack.

The ghost immobiliser also has an benefit: it can be inserted into your vehicle without leaving permanent marks. It's ideal for Ghost immobiliser installation those who are planning to sell their car in the near future. It's also more efficient and less time-consuming to install than the factory-installed system.

The Autowatch Ghost, a revolutionary new-generation device, prevents thefts from cars that are not connected to a vehicle's CAN network and using the buttons to generate a unique PIN code. It is a devious system that can be installed without cutting any wires and requires no additional key fobs. It is also connected to the vehicle's original ECU to prevent thieves from gaining access to it using new keys or replacing the ECU with an "relay". This system is TASSA certified and is connected to an International Security Register, allowing owners to have peace of mind knowing that their vehicles are safe from theft.

No scanning by RF

You will want to protect your vehicle from theft if have spent a lot of money and Ghost immobiliser Installation spent a lot of time customizing it. One of the best ways to accomplish this is to install an immobiliser. It will prevent your engine from running until you enter a unique PIN. Utilizing the buttons on your steering wheel as well as the dashboard, you can generate a PIN up to 20 digits long that is only known by you, making sure that only you are able to drive your vehicle. It is also possible to set up a service or valet mode, which allows you to start your car for a short period without entering the PIN code. This will allow technicians to work on your vehicle, without being present. This is an excellent option for people who are looking to reduce time and make their lives easier.

Ghost immobilisers are next-generation device that connects to your vehicles CAN data network and utilizes the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to be discreet and has no indicators or sounds to make it obvious and can be installed anywhere on your vehicle without disturbing the aesthetics of your beloved vehicle.

This stealthy device is approved by TASSA and can reduce your insurance costs. It also has the ability to track, which can locate your vehicle even if it has been stolen. This is great when you own a unique, expensive vehicle that you've put a lot of effort customizing.

The Autowatch ghost immobiliser problems can be used together with an iPhone application that allows you to start your car remotely if you forget your PIN or are not able to access the vehicle due to a reason. This feature is great for those who need to run errands or pick up your children and do not want to risk having someone else drive your vehicle. It is also helpful if you need to take your vehicle to a mechanic for maintenance or repair.

The Ghost is unique in that it does not transmit or detect radio frequency, so it is undetectable by thieves who employ RF scanning and code grabbing technologies. It also shields your car from key copying, ECU swapping and other common methods of car theft.

No key cloning

Ghost immobilisers are a great option for protecting expensive vehicles and are designed to prevent key cloning. They stop your car from being started unless a PIN code is entered in conjunction with the standard key fob. This makes it very difficult for thieves to steal your vehicle, and can deter them from attempting. This is an especially good option if you've invested an enormous amount of time and money customizing your vehicle or own a unique or expensive model.

These immobilisers are connected to the vehicle's CAN data network and are completely hidden which means that their presence is not obvious. It is also impossible for a burglar to locate the device using radio frequency scanning or code technology for grabbing. This means that a thief will need to take longer to take your vehicle.

To get around the system, thieves need to be aware of the unique pin code and the location of the Ghost. The pin code is unique to you and you can alter it as many times as you want. The pin you select is easy to remember, but mathematically difficult for anyone else to understand. Additionally, the engineer will provide you with an emergency PIN code to override if you ever forget the pin.

The Ghost CAN Bus immobiliser could be easily installed anywhere on your vehicle. It can be used with any vehicle and can be fully customized to match your car's appearance. It is also cost-effective and simple to use. You can even transfer the device to another vehicle if you change vehicles in the course of ownership, provided that the new vehicle is compatible with the.

The immobiliser on the CAN bus is compatible with many other security features. For instance, it can detect damage to your vehicle and warn the owner. It could also stop the engine in the event that the car is damaged. The system can protect your vehicle from hacking as well as key duplicate. It also detects vibrations or contact with the vehicle. In addition, it could alert the owner if the vehicle has been moved.

No OBD port hacking

Ghost is a hidden device that is connected to the CAN data network of your vehicle. This will stop thieves from getting into your vehicle to disable the alarm, turn off your key fob, or make new keys. This technology is an enormous improvement on traditional methods that have been employed by thieves in the past to steal your vehicle. The CAN data network ensures that the system won't be affected by disconnecting or replacing the battery.

The Autowatch Ghost is the first aftermarket CAN bus non-detectable immobiliser that protects against hacking, key-cloning and copy-cat car theft. It does not use LED indicators or key-fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to allow you to create a unique PIN code sequence (up to 20 button presses) which must be entered first before you can drive your car away.

Modern thieves use diagnostics to identify circuit cuts on your vehicle. They can bypass immobilisers that require lots of wiring or are incorporated into the wiring. The ghost immobiliser for sale is weatherproof, does not require additional wiring and cannot be identified by diagnostic tools that are professional. It can be installed even on vehicles equipped with anti-theft systems.

A ghost immobiliser near me immobiliser also has a significant benefit: your car can only start by someone who knows your PIN code and has physical access to your vehicle. This is a significant advantage over traditional security systems that can be tampered with using simple cable manipulation, a screwdriver, or the use of a universal remote controller.

You can easily reset your PIN in case you forget it by using the emergency PIN reset feature on a computer or mobile phone. This is helpful if you are looking to start your vehicle after leaving it in a garage or using a valet parking service.

The Autowatch Ghost 2 has been certified for insurance by TASSA and is able to be installed by our authorized installers. It has an RFID fingerprint system that can identify specific parts, which allows for the return of stolen items in the event that they are discovered. It can also be set to'service mode', which allows the engine to be started when your vehicle is in a garage, or if you have valet parking, however, you'll need to enter your PIN code again to exit the car.